The Shure A15AS Switchable In-Line Attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB. It is specially suited to reducing the level of a high-output microphone to prevent it from overloading the microphone input of a mixer or recorder in applications with high sound pressure levels. In addition, the A15AS may be used to reduce the level of a line-level mixer output to prevent overloading the aux-level input of a recorder. The A15AS is equipped with a female 3-pin XLR connector on the input side, and a male 3-pin XLR connector on the output side. Attenuation is controlled by a three-position slide switch. The A15AS allows phantom power to pass through from the mixer to the microphone, so it can be used with condenser microphones.
Shure A15AS atenuator
Достапно со нарачка
Додајте го производот во кошничка и комплетирајте ја нарачката. Ќе ве контактираме во најбрз можен рок.
The Shure A15AS Switchable In-Line Attenuator reduces the level of any balanced microphone or line-level signal by 15, 20, or 25 dB.
SKU: SHA15AS
Категорија Сталки и прибор
Опис
Спецификација
Specifikacija
| Specifikacija |
In-Line Accessory Type Attenuator/Pad Input / Output Level Input: Mic/Line Level Output: Mic/Line Level Number of Channels 1 Attenuation -15 dB / -20 dB / -25 dB (Selectable) Controls 1 x Pad Switch Connectivity I/O 1 x XLR 3-Pin Female Input 1 x XLR 3-Pin Male Output Performance Impedance Input: 1 Kilohms Output: 150 Ohms Physical Dimensions 4.5 x 0.7" / 11.4 x 1.9 cm |





