Record and Play Back Up to 394 Channels via USB 3.0
The original RME MADIface was an instant hit. Then came the MADIface XT, the world’s first interface to leverage the power of USB 3.0. Now, the RME MADIface XT II once again raises the performance bar with increased channel count and updated digital and analog circuitry. As compared with its predecessor, this 394-channel 192kHz USB 3.0 audio interface offers a higher signal-to-noise ratio and lower THD value during A/D conversion. The maximum level of the XLR line outputs has been bumped up to +24dBu from +15dBu. The MADIface XT II’s headphone output now delivers a notably higher output level of +19dBu and, boasting an output impedance of 1 ohm, can now drive a broad selection of modern headphones. Switchable level options for all the outputs provide smooth integration into your live rig or DAW-based studio.
Powerful features, plentiful I/O
MADIface XT II features two mic/line preamps on XLR/TRS combo jacks, two balanced XLR line outs, a stereo headphone output, one MADI coaxial and two MADI optical connections, MIDI/AES, and word clock. The new digital board includes an ARC USB remote port that facilitates complete control of the MADIface XT II via the optional ARC USB remote. TotalMix FX mixing software gives you unlimited routing of inputs and outputs and up to 99 fully independent stereo submixes. Meanwhile, the DigiCheck Analyzer analyzes and measures the digital data feed in both directions. The MADIface XT II also features a Room EQ function, which offers nine parametric bands for use in surround configurations for up to 20 mono output channels.
Updated clocking and hardware
As implemented in the MADIface XT II, RME’s proprietary SteadyClock FS features RME’s cutting-edge clock and jitter reduction technology. Based on a femto clock, SteadyClock FS reduces the jitter of the MADIface XT II to vanishingly low levels and expeditiously filters clock jitter from as low as 1Hz. The MADIface XT II’s USB 3.0 Class Compliant Mode has also received an upgrade that enables all 394 channels to be transmitted concurrently without a driver. In order to optimize Class Compliant Mode, you now have multiple formats and settings for the channel sequence.
Key Features:
- USB 3 connectivity
- 192kHz
- 196 Input / 198 Output channels
- 2 x MADI I/O optical
- 1 x MADI I/O coaxial
- 2 x Analogue Mic / Line Preamp Input (XLR/Line TRS)
- 4 x Analogue Output (Main XLR + Phones)
- 1 x AES/EBU I/O via breakout cable
- 1 x MIDI I/O via breakout cable
- 3 x virtual MIDI I/O via the three MADI I/Os
Features:
- 394-channel 192kHz USB 3.0 audio interface
- 2 mic/line inputs, 2 balanced analog outs
- 1 MADI coaxial and 2 MADI optical connections, MIDI/AES, and word clock.
- Stereo headphone output
- TotalMix FX mixing software gives you unlimited routing of inputs and outputs and up to 99 fully independent stereo submixes
- Full functionality in standalone mode; remote control capability via optional ARC USB remote
- Can be used as a MADI optical/coax format converter or as a signal repeater
- Includes DIGICheck, a complete audio measurement, analysis and test tool
- USB 3.0 Class Compliant mode
Specs:
- Computer Connectivity: USB 3.0
- Form Factor: Desktop
- Analog Inputs: 2 x XLR-1/4″ combo
- Analog Outputs: 2 x XLR
- Digital Inputs: 1 x Coax (MADI), 2 x Optical (MADI)
- Digital Outputs: 1 x Coax (MADI), 2 x Optical (MADI)
- Headphones: 1 x 1/4″
- MIDI I/O: 1 x 9-Pin (MIDI/AES
- USB: 1 x Type-B, 1 x Type-A (Remote)
- Clock I/O: 2 x BNC (In/Out)
- Power Supply: 12V DC power supply (included)





