Experience a whole new level of musical detail:
Our unique approach towards electronics and capsule design makes the microphone better than human hearing. With the LCT 540 S, we set a new benchmark in terms of capturing fine-grained details of your recording source. Record details of your voice and instruments that usually wouldn’t even be audible. Make every detail count.
Self-noise values below the threshold of human hearing:
Our hearing threshold is very frequency-dependent. It is less sensitive towards low and very high frequencies and most sensitive around 2 – 5 kHz. With our specific and unique approach towards circuit and capsule design, we were able to realize self-noise that’ll stay below the threshold of hearing across the entire frequency spectrum.
Fit for extreme processing:
With its cutting-edge circuit and capsule design, the LCT 540 S features an impressive dynamic range of 132 dB to capture everything from loud to subtle. You won’t hear the self-noise of the mic even after heavily compressing the signal. Material recorded with the LCT 540 S is fit for extreme processing.
Perfect match technology:
Every single LCT 540 S undergoes a series of measurements followed by adjustment of the polarization voltage to achieve the same sensitivity in every LCT 540 S we will ever produce. This way, you can form a pair when you buy another one later on.
Key Features:
- 1″ true condenser studio microphone
- Self-noise below the threshold of human hearing
- Ideal for extreme processing
- Low-cut filters and attenuation
- Cardioid polar pattern
Included: Shock mount, Magnetic pop filter, Foam windscreen, Transport bag , Transport case
Specifications:
- Type: Condenser, externally polarized
- Acoustical operating principle: Pressure gradient transducer, externally polarized
- Transducer Ø: 25.4 mm, 1 in
- Diaphragm: 3 micron gold sputtered Mylar
- Polar pattern: Cardioid
- Frequency range: 20 … 20,000 Hz
- Sensitivity: 41 mV/Pa, -28 dBV/Pa
- Self-noise: 4 dB (A)
- Max. SPL for 0.5 % THD: 136 dBSPL, 0 dB attenuation
- Signal / noise ratio: 90 dB (A)
- Dynamic range: 132 dB (A)
- Attenuation: 0 dB/-6 dB/-12 dB
- Low-cut filter: linear 80 Hz (6 dB/oct)/160 Hz (6 dB/oct)
- Internal impedance: 68 Ω
- Supply voltage: 48 V ± 4 V
- Current consumption: 3.6 mA
- Microphone enclosure: Zinc die cast
- Connector: Gold-plated 3-pin XLR
- Microphone dimensions: 158 x 52 x 36 mm, 6.22 x 2.04 x 1.42 in
- Microphone net weight: 371 g, 13.1 oz











