Legendary Vintage Tone, No Compromises
Building upon the great success of the Rupert Neve Designs 5088 Console, a large-format, Class-A discrete tracking & mixing solution for the most discerning audio professionals, the 5022 was designed to maximize the amount of inputs available in one 5088 Penthouse Module by providing two class-A, electronically balanced mic preamps, 2 variable high pass filters, and a variable Silk / Texture control for each input channel.
Designed to the same +/- 24V power spec as the 5051, 5052, and 5053 Penthouse Modules, the 5022 can populate an entire 5088 console or be mixed and matched with other Penthouse Modules to provide a versatile combination of flavors suitable for literally any source.

The Mic Preamps
Starting with the very first Portico Series of Mic Preamps, Rupert Neve Designs has been on a quest to design an incredibly low noise, high gain, wide bandwidth class-A input stage that is electronically balanced to faithfully reproduce the essence of the source. The dual Mic Preamps in the new 5022 Penthouse Module are the pinnacle of this design, a result of over 18 years of painstaking R&D.
The 5022 also includes our variable high pass filter with a range from 20 Hz – 250 Hz, plus polarity reverse and 48V phantom power switches.


Transformer Output with Silk & Texture Controls
The custom RND output transformer in the 5022 features the Silk Red / Blue and Texture controls to precisely tailor the harmonic content and tonality of the output stage. Pushing the Silk button cycles the Silk modes from Red to Blue to OFF. The SILK Texture control adds harmonic content as the texture value is increased. Red Silk accentuates the musical harmonic saturation in the mid and high frequencies, while Blue Silk accentuates harmonics in the low and low-mid frequencies.
By manipulating the Texture control, the amount of Silk can be changed from essentially absent, to roughly 4-5% THD (mostly second order) depending on how hard the output transformer is being driven. This gives 5022 users total control over dialing in a classic, vintage or modern sound.


MIC / LINE
Push-button switch that selects the mic input or the line input.
TRIM
Center-detent potentiometer that controls the input trim within a range of +/- 6 dB.
+48V
Illuminated push-button switch that engages 48V Phantom Power
POLARITY
Illuminated push-button switch that inverts the phase of the input signal
MIC GAIN
12-position rotary switch that controls the mic preamp gain in 6 dB steps
LEVEL METER
8-segment LED meter that displays output level in dBu pre-SILK
HIGH PASS FILTER
Continuously variable potentiometer (engaged with the HPF push-button switch) that controls the cutoff frequency of the high pass filter within a range of 20 Hz to 250 Hz.
SILK
Illuminated push-button switch that toggles through the three available SILK modes: OFF, RED & BLUE
TEXTURE
Continuously variable potentiometer that controls the amount of SILK harmonics when SILK is engaged
SPECIFICATIONS:
MIC PRE
- Input Impedance: 2200 ohms
- Frequency response:
30dB gain, +4dBu out, 150-ohm source impedance
+/-0.2dB, below 5Hz-50kHz - Noise 22Hz-22kHz:
@ unity -101dBu
@ 30 dB gain -94dBu
@ 66dB gain -61dBu
EIN 22Hz-22kHz, unweighted
- @ 30dB gain, -124dBu
- Maximum input level:
+24dBu @ 1kHz
+6dBu, 22Hz-22kHz - THD + Noise, 1kHz @+4dBu out w/30dB Gain: 0.002% typical
LINE INPUT
- Input Impedance: 10 kohms
- Frequency Response:
+/- 0.1dB, 16Hz-34kHz
+/-0.5dB, 7Hz-90kHz - Noise 22Hz -22kHz: -102dBu
- Maximum input level @ 1kHz: +26.3dBu
- THD + Noise, 1kHz @+4dBu: Better than 0.002% typical
EQ
- High Frequency:
+/- 15dB, center frequency selectable 8kHz / 16kHz
Selectable peak/shelf modes - Inductor based Mid Frequency:
+/-15dB, center frequency selectable 200Hz, 350Hz, 700Hz, 1.5kHz, 3kHz, 6kHz (+/-10%)
Mid Hi Q selectable option - Low Frequency:
+/- 15dB, center frequency selectable 35Hz, 60Hz, 100Hz, 220Hz
Selectable peak/shelf modes
OUTPUT STAGE SILK MODE
- Selectable RED/BLUE Silk modes
- Continuously variable Silk Texture control





