IK Multimedia iRig Stomp I/O | USB Pedalboard Controller with Audio Interface

19,200ден

Integrating a powerful iPad app and MFi-certified audio interface, the iRig Stomp I/O pedalboard puts a world of tone at your feet in the studio or on stage.

- +

Опис

The IK Multimedia iRig Stomp I/O is a USB pedalboard controller that integrates a professional, high-resolution, MFi certified audio interface with MIDI input/output for iPhone, iPad, Mac, and PC. It comes bundled with state-of-the-art guitar, vocal processing, and recording software for flexibility and usability, both live and in the studio.

Sturdy and robust, yet easily transportable, iRig Stomp I/O features four onboard metal stomp switches plus an expression pedal with a switch, all with LED indicators. To further extend its control possibilities, you can connect up to 2 additional switches or pedals. The MIDI IN/OUT ports make it possible to seamlessly control external processors when iRig Stomp I/O is used as a stand-alone MIDI foot controller, without any device or computer connected to it.
The Neutrik 1/4″ XLR combo jack accepts instruments and microphones including condenser mics with switchable 48V phantom power. The balanced stereo output connects to an external amp, mixer or PA, and a 1/4″ stereo headphone output is available for silent monitoring. The input gain and volume output knobs are easily accessible on the front panel, each with its dedicated LED VU-Meter indicator, for the quick-and-easy setting of levels.

iRig Stomp I/O boasts an elegant all-in-one design that perfectly highlights its flexibility and versatility. In a single piece of equipment, you now have everything you need to record in the studio, rehearse, or go out on stage and gig, without having to assemble a bulky and costly hardware setup.

With its high-quality 96kHz/24-bit audio interface, iRig Stomp I/O lets you easily record your guitar, bass or microphone – including studio condensers requiring 48VDC phantom power with true studio quality on iPhone/iPad, Mac and PC. The seamless integration with AmpliTube and VocaLive makes it as easy as plug-and-play to record on multiple devices using IK’s powerful, state of the art, 64-bit software. iRig Stomp I/O features a Class A preamp that can rival, if not surpass, the sound quality of floor processors costing up to three times as much.

Спецификација

спецификација
Спецификација General:- Conversion: 24-bit A/D, 24-bit D/A- Sampling Rate: 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz- Power: USB Bus Powered (when used with a computer) or DC IN- Device Connection: USB B-Type and Mini-DIN- Enclosure: Metal SheetMicrophone Input:- Connector: Balanced Female 3-Pin XLR. Pin 2: Hot / Pin 3: Cold / Pin 1: Ground- Microphone Input Level: From 6 mVpp to 1.4 Vpp- Microphone Input Impedance: 3.2 kOhms- Gain Range: 46 dB- Phantom Power: +48V ± 4V- Frequency Response: 20 Hz – 20kHz +/-1.5dB- Input Noise: -100 dB RMSInstrument Input:- Connector: unbalanced, Hi-Z, TS 1/4" Jack. Tip: signal / Shield: ground- Instrument Input Level: from 30mVpp to 6.9Vpp- Instrument Input Impedance: 1MOhms- Gain Range: approx 27dB- Frequency response: 20 Hz – 20kHz +/-1.5dB- Input Noise: -100 dB RMSStereo Headphone Output:- Connector: 1/4" TRS Jack. Tip: Right / Ring: Left / Shield: Ground- Headphone Level control: Potentiometer- Headphone Output Power: 100mW into 50OhmsStereo Line Output:- Connector: 2x Balanced Female 1/4" TRS Jack. Tip: Hot / Ring: Cold / Shield: Ground- Maximum Output Level: +13 dBu into 600 Ohms balanced load- Frequency Response: from 10 Hz to 21 kHz (+/- 0.2dB)- Output Dynamic Range: 102 dB(A)- Output Impedance: 150 Ohms Balanced- Floating Balanced OutputsMIDI Input/Output:- Connector: 2x 5-pin DINTop Panel:- Four metal foot-switches with one indication LED each, dual color- Two analog potentiometers for Input GAIN and output VOLUME- "Stomp MODE" LED- "Phantom 48V" LED- "PEDAL" LED- 4 segments mono input level meter (peak)- 4 segments device output meter (peak)- Continuous pedal (expression pedal) with virtual switch at the top of its travelRear Panel:- Neutrik Combo socket for MIC input and Instrument input (auto selecting)- +48V phantom power switch- 1/4" headphones output- 2 x 1/4" TRS Balanced floating line outputs- MIDI I/O 5-pin DIN connectors- 2 x 1/4" TRS External controllers sockets- B-Type USB socket for connecting a computer (Mac/PC)- Mini-DIN "iOS" connector for connecting an iOS device- Barrel DC-in socket for powering up the Stomp I/O and charging the iOS device at the same timePackage includes:- iRig Stomp I/O- Lightning to Mini-DIN connection cable (60cm/23.62")- USB A-Type to USB B-Type connection cable (2.5m/8.2ft)- DC power supplyDimensions:- Size: 41.5cm/16.3" x 21cm/8.5" x 7.2cm/2.83"- Weight: 3.2kg/7.1lb- Lightning to Mini-DIN connection cable (60cm/23.62")- USB A-Type to USB B-Type connection cable (2.5m/8.2ft)Dimensions and Weight in PackagingBase ItemShipping Weight: 9.25 lbsShipping Dimensions: 21 x 11 x 6 inManufacturer Part Number (MPN): IP-IRIG-STOMPIO-IN

Бренд

Brand

IK Multimedia

Кошничка
IK Multimedia iRig Stomp I/O | USB  Pedalboard Controller with Audio InterfaceIK Multimedia iRig Stomp I/O | USB Pedalboard Controller with Audio Interface
19,200ден
- +
Scroll to Top