Millennia HV-3C Ultra-wide Dynamic Range Stereo Mic Preamp
The Millennia HV-3C is an updated design of the HV-3B two channel mic preamp, with improved mechanical design and cosmetics, and standard 36 step gain control. Combining a precisely matched octet of discrete bipolar transistors with a laser trimmed DC coupled FET-based output driver stage, the HV-3C is an entirely “double balanced,” extremely wide dynamic range stereo microphone preamplifier intended for demanding acoustic recording. According to Gary Garritan of Garritan Orchestral Strings, “Millennia Media HV-3 is the preamp of choice. I own a number of high-end mic preamps and always reach for the HV-3 when recording orchestral samples.”
Millennia HV-3C At-a-Glance
- Super-clean Signal Path
- High Headroom
- Audiophile-quality Sound
Super-clean Signal Path
Unlike “textbook” mic preamplifiers, the HV-3C signal path never unbalances or rebalances the original signal – thus maintaining a high degree of signal integrity. Over 20,000 channels of HV-3 micamps are already in use by a who’s-who in critical acoustic recording.
Unlike preamps using vacuum tubes, IC function modules and audio transformers (all of which can lend their own audio coloration) the Millennia HV-3C is precisely optimised towards capturing the subtlest detail of music and ambience.
High Headroom
With +23 dBu native input headroom, the HV-3C requires no input pads, attenuators, or switch points as found on common textbook preamp designs – thus avoiding yet another source of sonic degradation. Moreover, with its +32 dBu output headroom, ultra-high dynamic stability and linearity is assured. HV-3C uses the identical preamps as found in the HV-3D 8-ch units.
Audiophile-quality Sound
Uncompromising circuit design with meticulous selection and hand-matching of critical components assures consistently transparent audio performance at all dynamic excursions and frequency extensions. HV-3C signal path from input through output is entirely balanced with a minimum amplifier topology.
Key Features:
- Unsurpassed ambience retrieval
- Transformerless design with matched hi-speed discrete transistor octet has +23 dBu input headroom: no attenuator “pads” needed
- Uncoloured timbral accuracy at all dynamic levels
- Entirely balanced audio path with precision components maintains signal integrity: THD under 5 ppm (.0005%)
- Effortless, vividly realistic musical performance
- Laser-trimmed FET-based output stage has +32 dBu headroom: drives 1000 foot (300 m) cable runs with ease
- Standard 36-step gain controls (1.5 dB per step) are stereo matched to .08 dB
- Ultra-clean universal power supply life-rated for over 500,000 hours MTBF (90-240VAC)
- Grayhill mil-spec gold switching
- Mogami Neglex OFC audio wiring
- Silver Teflon power wiring
- Welded 16 gauge steel rack chassis
- Lovingly hand-crafted in Northern California
Specifications:
| Minimum Gain: | 8.5 dB |
| Maximum Gain (1.5 dB per step, 36 steps): | 60 dB (up to 70 dB on request) |
| Frequency Response (+0 / -3 dB): | sub 8 Hz to beyond 300 kHz (sub 3 Hz by request) |
| Noise (60 dBu Gain, 10 Hz – 30 kHz, Inputs common): | -133 dB EIN |
| Total Harmonic Distortion + Noise (35 dB Gain, 10 Hz – 20 kHz bandwidth, +27 dBu Out): | < .001%, Typ. < .0005% (< 5 ppm) |
| Intermodulation Distortion (50 Hz & 7 kHz) 35 dB Gain, +27 dBu Out: | < .0009% |
| Phase Response (35 dB Gain, 50 Hz – 20 kHz bandwidth, +27 dBu Out): | < 2 degrees deviation |
| Common Mode Rejection Ratio (35 dB Gain, 10 Hz – 20 kHz bandwidth, 100 mV C.M.): | > 65 dB, Typ > 85 dB |
| Slew Rate (35 dB Gain, +27 dBu Out): | > 25 Volts per microsecond |
| Maximum Input Level (20 Hz – 40 kHz): | +23 dBu (no attenuator pads required) |
| Maximum Output Level (20 Hz – 40 kHz): | +32 dBu |
| Phantom Input Impedance (1 kHz): | 6,750 ohms |
| Output Impedance: | 24.3 Ohms (x2) |
| DPA (B&K) Mic Powering: | +130 V dc max, (non-phantom) |
| Phantom Powering: | +48 V dc, +/- 4 V dc |
| Power Consumption: | 12 watts maximum |
| Power Requirements: | 100V to 240V, 50/60 Hz |
| Dimensions/Shipping Weight: | 19” W x 1.75” H x 12” D, 15 lbs.. |







